© 2018 by SPS Surface Protection. 

  • Facebook - Black Circle

ABOUT

CleanWirx eliminates macro- and micro- corrosion generators. Scanning Electron Microscopy provides clear empirical evidence that CleanWirx eliminates mill scales, micro-contaminants, interference materials and corrosion reaction sites that rust converters, rust removers,

salt removers and conventional surface prep processes routinely leave behind.

CleanWirx is not a film former, converter or inhibitor.

Film formers, converters and inhibitors
are expensive chemical products that attempt to maintain the appearance of"clean” metal by retarding flash rusting through diluting some, and temporarily masking all, surface contaminants. In doing so, they hide mechanisms that will eventually cause the coating system to fail.

This is why professionals don’t use them.

Dehumidification and reblasting steps are simply not needed when using CleanWirx for surface prep. 

Moreover, CleanWirx is “coating-neutral”, with ZERO film formers and ZERO interference compounds (known to inhibit coating adhesion). CleanWirx does not soften, degrade, remove or otherwise affect intact old coatings. CleanWirx has no detrimental effect on galvanized, inorganic zinc coating or thermal spray metal coatings when used according to recommended dwell times. CleanWirx vastly improves the condition of metal substrates to ensure strong, uniform coating adhesion for maximum longevity and performance.

PRODUCTS

Soak for Tank, Dip or Ultrasonic Use

OxNot Soak

RECOMMENDED FOR:

Complex Configurations Tools & Equipment Parts,

Components Fasteners & Pipes

•  Restore & recover rusted or contaminated inventory     

•  Improve machined part & metal component surfaces    •  Protect & passivate stainless steel,

    copper & steel surfaces

•    FAST DRYING     

•    EASY TO USE     

•    pH STABILIZING     

•    NO FILM, NO RESIDUE     

•    NO ACID BATH

Achieve the ultimate metal hygiene in minutes & helps prevent corrosion well into the future.

Simple & direct method lets you soak, rinse & go. Submerge metal assets or components in OxNot decontamination bath. Remove captured impurities quickly with OxNot no-residue passifying rinse. Apply your preferred protective paint or coating to prevent corrosion above & beneath coating surface. Coating neutral OxNot creates optimally receptive surfaces for improved adhesion & consistent, optimized coating performance. Biodegradable OxNot is completely free of chemical toxins such as methyl chloride, chlorinated solvents, methanol, toluene & acetone.

Removes Even Strongly Bonded Microscopic Traces of:

Oxidization/Corrosion Chlorides/Soluble Salts & Iron Sulfides 

MIC/Sulfate Reducing Bacteria Chemical & Biological Contaminants

For Post Dry Abrasive Blast Use

OxNot Gel

RECOMMENDED FOR:

Remedial Cleaning

Maintenance

Fabrication

Confined Spaces

•  Cleans & decontaminates before & after weld joining  

•  Promotes stronger welds & alleviates weld puddling            issues   

•  Purifies stainless steel, copper, steel & alloy metals

•    FAST DRYING     

•    EASY TO USE     

•    pH STABILIZING     

•    NO FILM, NO RESIDUE     

•    NO ACID BATH

Achieve the ultimate microscopic metal hygiene in minutes & helps prevent corrosion well into the future. Simple & direct method. Mix OxNot Gel, apply to metal assets or components, then remove captured impurities quickly with OxNot no-residue stabilizing rinse. Apply your preferred protective paint or coating to prevent corrosion above & beneath coating surface. OxNot creates optimally receptive surfaces for improved coating adhesion & consistent, optimized coating performance. Biodegradable OxNot is completely free of chemical toxins such as methyl chloride, chlorinated solvents, methanol, toluene & acetone.

Removes Even Strongly Bonded Microscopic Traces of:

Visible & Invisible Oxidization/Corrosion

Chlorides/Soluble Salts & Iron Sulfides 

MIC/Sulfate Reducing Bacteria Chemical & Biological Contaminants

For Use During Wet Abrasive Vapor Blast

OxNot 207

RECOMMENDED FOR:

Field Repairs

Structures & Pipelines

Vessels & Tanks

High Humidity Areas

•  Cleans & decontaminates metals at clinical hygiene            levels.  

•  Promotes stronger coating adhesion & performance   

•  Achieve white-metal hygiene 'beyond visible'

•    FAST DRYING     

•    EASY TO USE     

•    pH STABILIZING     

•    NO FILM, NO RESIDUE     

•    NO ACID BATH

Achieve the ultimate visual & microscopic metal hygiene in minutes, stop flash rust & prevent undercoating corrosion well into the future. Apply OxNot207 to metal assets or components to remove captured impurities in one step. Coating neutral OxNot works with any coating system. OxNot creates optimally receptive surfaces for improved adhesion & consistent, optimized coating performance. Biodegradable OxNot is completely free of toxic methyl chloride, chlorinated solvents, methanol, toluene & acetone.

Removes Even Strongly Bonded Microscopic Traces of:

Visible & Invisible Oxidization/Corrosion

Ionically Bonded Chlorides,

Soluble Salts, Sulfates, Sulfides,

Nitrates MIC/Sulfate Reducing Bacteria Chemical & Biological Contaminants

For Oil Stain Removal

LiftWirx

Use full strength for oil stains

or dilute with water to use for general cleaning

and removing grease.

•  Penetrates, captures & removes natural

   or synthetic oil stains from porous or

   non-porous surfaces. 

•    BIODEGRADABLE     

•    HAZARD-FREE     

•    TOXIN-FREE     

•    INDUSTRIAL-STRENGTH